Makeatronics Store

Welcome to the new store! Here you will find all the products I have for sale. Previously they were only accessible from their individual blog posts which was a little confusing when making a purchase.

All design files are freely available under the Creative Commons license, which means you are free to manufacture these yourself. Sales here directly influence how much time and money I can spend on new projects. If you like what you see the best way to see more is to buy!

Little Wire SMD

A more compact version of the Little Wire.


Sous Vide Control Board

Control 120V AC mains voltage with temperature feedback to create your own sous vide setup.


24V AC SSR Board

Use this board as an interface between low voltage GPIO pins and the 24V AC lines of your thermostat.


IR Remote Repeater

Use this to repeat the signal from your remote control into a media closet.


Smart BLDC Commutator

A controller to interface with BLDC motors with hall sensors. Behaves like you would expect an H-bridge to work, but with built in position tracking accessible via SPI.


Wireless HVAC Sensors

Wireless temperature and humidity sensors that live discretely behind a light switch face plate. 




Note: Only one TMP36 sensor is included in the components. HIH-5030 humidity sensor and DS18B20 digital temperature sensor are not included.

Shipping is free within the United States. International orders will be sent a followup invoice through PayPal to cover international shipping.

12 comments:

  1. "International orders will be sent a followup invoice through PayPal to cover international shipping."
    What does it mean exactly ?

    ReplyDelete
    Replies
    1. When somebody from outside the USA orders from this store then I will send an invoice to their PayPal email address to charge for international shipping. The rates vary by weight and destination, but usually fall in the $6-12 range.

      Delete
  2. Hey nick, I ordered a couple of yours ss relay boards a couple of weeks ago. How do I find out the status of my order?

    ReplyDelete
    Replies
    1. Sorry for the delay. Please read this:
      http://makeatronics.blogspot.com/2015/10/recent-makeatronics-store-purchases.html?m=1

      Delete
  3. Ditto what Brian D. said, I'm also waiting on a relay board.

    ReplyDelete
    Replies
    1. Sorry for the delay. Please read this:
      http://makeatronics.blogspot.com/2015/10/recent-makeatronics-store-purchases.html?m=1

      Delete
  4. How can I check the status of an order? I ordered a SSR board

    ReplyDelete
    Replies
    1. I apologise for the delay. I am swamped with orders and have not been doing my part to inform you and others of the status of their orders. I hope to be caught up within the week.

      I have been doing this in my free time for several years now, and it's beginning to get unsustainable with the amount of time I spend on it. I am looking for possibilities of partnering with others who have the ability to produce the boards more efficiently, but in the meantime​ I am left assembling them myself.

      My point in telling you this is not to excuse the delayed response, but rather to inform you that I am aware of the problem and looking for a long term solution.

      Delete
  5. hi , so the Smart BLDC Commutator can be controlled by a external arduino in same way it control a l298n h-bridge? what is the max power they can handle? can be send as gift? customs here takes ages to release parcels! best regards

    ReplyDelete
  6. Dear Nich Fugal,
    recently I bought 2 of Smart BLDC Commutator fully assembled. I live in Germany. As I see it is difficult to manufacure this boards in short. Because of this I will to make this boards myself with eagle parts you published. Can you please send the payment back?

    Thank you!

    ReplyDelete
  7. Another question,
    I have motors from maxon for 24V will your BLDC board do work with them? When not which parts do I need?

    Thank you!

    ReplyDelete
  8. Hello, I've recently purchased parts on your store however I no longer need them. I was wondering if you could issue a refund as I have not received my ordered items yet. Thank You!

    ReplyDelete